[AUTOMATIC_INDEX_INFORMATION]
# POS : 4
0 = Automatic index OFF
1 = Automatic index OPERATING
3 = Automatic index OPERATING

[INPUT_MODE]
# POS : 5
0 = Original measured values transferred from the instrument
1 = Manual input from keyboard
2 = Measured value, Hz-Correction ON
3 = Measured value, Hz-Correction OFF
4 = Result of special function

[UNITS]
# POS : 6
0 = Meter # (last digit: 1mm / 0.000m)
1 = Feet # (last digit: 1/1000ft / 0.000ft)
2 = 400 gon
3 = 360° decimal # (DDD.DDDDD)
4 = 360° sexagesimal # (DDD.MMSSS)
5 = 6400 mil
6 = Meter # (last digit: 1/10mm)
7 = Feet # (last digit: 1/10‘000ft)
8 = Meter # (last digit: 1/100mm)

[WORD INDEX]
11 = Pointnumber # WI11 / block: 11....+00000H66
# PtNo=“H66“
12 = Serial number # WI12 / block: 12....+00640054
# S.No. “640054”
13 = Instrument type # WI13; 13....+00TCR305
# Instr. “TCR305”
19 = Time # WI19 / block: 19....+02081029
# [MM.DD.hh.mm]
21 = Horizontal Angle # WI21 / block: 21.102+17920860
# Hz „179.086“ gon
22 = Vertical Angle # WI22 / block: 22.102+07567500
# V: „75.675“ gon
25 = Horizontal Angle Delta Azimuth # WI22 / block: 22.102+07567500
# V: „75.675“ gon
31 = Slope distance # WI31; e-g. 31..00+00003387
# Sdist: „3.387“ m
32 = Horizontal distance # WI32 / block: 32..00+00003198
# Hdist: „3.198“ m
33 = Height difference # WI33 / block: 33..00+00001119
# Hdiff: „1.119“ m
41 = Code-Block ID # WI41 / block: 41....+00000013
# Code: „13“ m
42 = Information 1 # WI42 / block: 42....+000TREES
# Info1: „TREES“
43 = Information 2 # WI43 / block: 43....+000004.5
# Info2: „4.5“
44 = Information 3 # WI44 / block: 44....+00CAT.02
# Info3: „CAT.02“
45 = Information 4 # WI45 / block: 45....+000000NN
# Info4: „NN“
46 = Information 5 # WI46 / block: 46....+000000NN
# Info5: „NN“
47 = Information 6 # WI47 / block: 47....+000000NN
# Info6: „NN“
48 = Information 7 # WI48 / block: 48....+000000NN
# Info7: „NN“
49 = Information 8 # WI49 / block: 49....+000000NN
# Info8: „NN“
51 = PPM/mm # WI51 / block: 51..1.+0000+034
# “0”ppm; “34”mm
58 = Prism constant # WI58 / block: 58..16+00000020
# Prism „2“ mm
59 = PPM # WI59 / block: 59..16+02200000
# PPM „220“
71 = Remark1
# (or Attribute 1)
# WI71 / block: 71....+0000REM1
# “REM1”
72 = Remark2
# (or Attribute 2)
# WI72 / block: 72....+0000REM2
# “REM2”
73 = Remark3
# (or Attribute 3)
# WI73 / block: 73....+0000REM3
# “REM3”
74 = Remark4
# (or Attribute 4)
# WI74 / block: 74....+0000REM4
# “REM4”
75 = Remark5
# (or Attribute 5)
# WI75 / block: 75....+0000REM5
# “REM5”
76 = Remark6
# (or Attribute 6)
# WI76 / block: 76....+0000REM6
# “REM6”
77 = Remark7
# (or Attribute 7)
# WI77 / block: 77....+0000REM7
# “REM7”
78 = Remark8 # (or Attribute 8)
# WI78 / block: 78....+0000REM8
# “REM8”
79 = Remark9
# (or Attribute 9)
# WI79 / block: 79....+0000REM9
# “REM9”
81 = Target Easting
# (E)
# WI81 / block: 81..00+01999507
# E: “1999.507”m
82 = Target Northing
# (N)
# WI82 / block: 82..00+00213159
# N: “2139.159”m
83 = Target Elevation
# (H)
# WI83 / block: 83..00-00032881
# H: “32.881”m
84 = Station Easting
# (E0)
# WI84 / block: 84..11+00393700
# E: “393.700”m
85 = Station Northing
# (N0)
# WI85 / block: 85..11+06561220
# N: “6561.220”m
86 = Station Height
# (H0)
# WI86 / block: 86..11+00065618
# H: “65.618”m
87 = Reflector height
# (hr)
# WI87 / block: 87..11+00001700
# hr: “1.700” m
88 = Instrument height
# (hi)
# WI88 / block: 88..11+00001550
# hi: “1.550” m