TC1100-GSI-Reports/GSI_data.ini
2024-03-12 06:37:30 +01:00

139 lines
3.5 KiB
INI
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

[AUTOMATIC INDEX INFORMATION]
# POS : 4
0 = Automatic index OFF
1 = Automatic index OPERATING
3 = Automatic index OPERATING
[INPUT MODE]
# POS : 5
0 = Original measured values transferred from the instrument
1 = Manual input from keyboard
2 = Measured value, Hz-Correction ON
3 = Measured value, Hz-Correction OFF
4 = Result of special function
[UNITS]
# POS : 6
0 = Meter # (last digit: 1mm / 0.000m)
1 = Feet # (last digit: 1/1000ft / 0.000ft)
2 = 400 gon
3 = 360° decimal # (DDD.DDDDD)
4 = 360° sexagesimal # (DDD.MMSSS)
5 = 6400 mil
6 = Meter # (last digit: 1/10mm)
7 = Feet # (last digit: 1/10000ft)
8 = Meter # (last digit: 1/100mm)
[WORD INDEX]
11 = Pointnumber # WI11 / block: 11....+00000H66
# PtNo=“H66“
12 = Serial number # WI12 / block: 12....+00640054
# S.No. “640054”
13 = Instrument type # WI13; 13....+00TCR305
# Instr. “TCR305”
19 = Time # WI19 / block: 19....+02081029
# [MM.DD.hh.mm]
21 = Horizontal Angle # WI21 / block: 21.102+17920860
# Hz „179.086“ gon
22 = Vertical Angle # WI22 / block: 22.102+07567500
# V: „75.675“ gon
25 = Horizontal Angle Delta Azimuth # WI22 / block: 22.102+07567500
# V: „75.675“ gon
31 = Slope distance # WI31; e-g. 31..00+00003387
# Sdist: „3.387“ m
32 = Horizontal distance # WI32 / block: 32..00+00003198
# Hdist: „3.198“ m
33 = Height difference # WI33 / block: 33..00+00001119
# Hdiff: „1.119“ m
41 = Code-Block ID # WI41 / block: 41....+00000013
# Code: „13“ m
42 = Information 1 # WI42 / block: 42....+000TREES
# Info1: „TREES“
43 = Information 2 # WI43 / block: 43....+000004.5
# Info2: „4.5“
44 = Information 3 # WI44 / block: 44....+00CAT.02
# Info3: „CAT.02“
45 = Information 4 # WI45 / block: 45....+000000NN
# Info4: „NN“
46 = Information 5 # WI46 / block: 46....+000000NN
# Info5: „NN“
47 = Information 6 # WI47 / block: 47....+000000NN
# Info6: „NN“
48 = Information 7 # WI48 / block: 48....+000000NN
# Info7: „NN“
49 = Information 8 # WI49 / block: 49....+000000NN
# Info8: „NN“
51 = PPM/mm # WI51 / block: 51..1.+0000+034
# “0”ppm; “34”mm
58 = Prism constant # WI58 / block: 58..16+00000020
# Prism „2“ mm
59 = PPM # WI59 / block: 59..16+02200000
# PPM „220“
71 = Remark1
# (or Attribute 1)
# WI71 / block: 71....+0000REM1
# “REM1”
72 = Remark2
# (or Attribute 2)
# WI72 / block: 72....+0000REM2
# “REM2”
73 = Remark3
# (or Attribute 3)
# WI73 / block: 73....+0000REM3
# “REM3”
74 = Remark4
# (or Attribute 4)
# WI74 / block: 74....+0000REM4
# “REM4”
75 = Remark5
# (or Attribute 5)
# WI75 / block: 75....+0000REM5
# “REM5”
76 = Remark6
# (or Attribute 6)
# WI76 / block: 76....+0000REM6
# “REM6”
77 = Remark7
# (or Attribute 7)
# WI77 / block: 77....+0000REM7
# “REM7”
78 = Remark8 # (or Attribute 8)
# WI78 / block: 78....+0000REM8
# “REM8”
79 = Remark9
# (or Attribute 9)
# WI79 / block: 79....+0000REM9
# “REM9”
81 = Target Easting
# (E)
# WI81 / block: 81..00+01999507
# E: “1999.507”m
82 = Target Northing
# (N)
# WI82 / block: 82..00+00213159
# N: “2139.159”m
83 = Target Elevation
# (H)
# WI83 / block: 83..00-00032881
# H: “32.881”m
84 = Station Easting
# (E0)
# WI84 / block: 84..11+00393700
# E: “393.700”m
85 = Station Northing
# (N0)
# WI85 / block: 85..11+06561220
# N: “6561.220”m
86 = Station Height
# (H0)
# WI86 / block: 86..11+00065618
# H: “65.618”m
87 = Reflector height
# (hr)
# WI87 / block: 87..11+00001700
# hr: “1.700” m
88 = Instrument height
# (hi)
# WI88 / block: 88..11+00001550
# hi: “1.550” m